Life off the grid in the SW Texas desert. An experiment in sustainable living. NUMBERS AT THE END OF EACH BLOG POST: temp at 8PM,high temp,low temp,rainfall,wind conditions(CalmBreezyWindyGusty). YouTube Channel https://www.youtube.com/c/TheFieldLab
Daily live streams at https://www.youtube.com/thefieldlab/live
Looks good.
ReplyDeleteMight I suggest installing a PVC-PTFE ball valve as the full-line-size isolation valve closest to the tank ?
As you probably know, that globe valve with a washer will eventually need to be opened up or removed for maintenance.
If that line at the bottom of the tank is ever going to be a suction line to a pump, you need at least a 1.5 inch line.
ReplyDeleteAlso, a globe valve produces a lot of pressure drop in a suction line, which is usually best to avoid.
Nice work!
ReplyDeleteI've had these valves on all my tanks for 10 years and have never had an issue using them with a 12 VDC pump nor have I ever had to change a washer.
ReplyDeleteNice! The silver paint should be a good UV-block, so the plastic will last a while.
ReplyDeleteGood idea on painting the PVC gray gives it a polished look.
ReplyDelete